27
PK1500
STACK CUTTER
ELECTRICAL
CONNECTION
Risk of electric shock.
The Stack Cutter must be connected via an earth-
leak circuit breaker.
Fix the machine’s power cable to the ceiling or
protect it in some other way. Never tread on the
cable.
When all the instructions under the section “Setting
up the cutter” have been followed:
Check that the guide bar and chain are correctly
installed. With the guide bar in its top position,
plug the machine in (E) and check that the motor
is running in the right direction by looking at the
chain in the guard from a safe distance (see safety
distance in the safety instructions). On the underside
of the guide bar, the chain should be running
towards the saw unit. If this is not the case, pull the
plug out of the machine and switch the phases in
the plug. Use a large flat screwdriver to turn the disc
(F) that holds two of the pins.
Risk of electric shock!
Only qualified electricians are authorised to open/
access the electrical system.
The plug does not need to be opened to switch
the phases.
CONTROL PANEL
Do not connect the machine to a power supply
before you have read and understood the entire
manual. Incorrect use may result in fatal injuries.
A Start
B
Emergency stop/stop
C
Safety button
D
Motor unit winding crank
E
Plug socket
F
Phase inverter
G
Winding crank safety catch
Start: Hold down the safety button and, at the same
time, press the green start button.
Stop: Press the red stop button.
EMERGENCY STOP:
Press the red stop button or release the safety button.
The red stop button is an emergency stop and
must not be blocked.
Risk of being hit by the winding crank.
Risk of the saw unit being lowered unintentionally.
Before releasing the safety catch (G), take a
firm grip of the winding crank (D). The safety catch
should always be on, except when the saw unit is to
be lowered.
G
D
E
B
A
F
C
Emergency
stop
Summary of Contents for 0458-395-0603
