12
Fig. 86
Fig. 87
Fig. 88
7. Starta matningen med strömbrytaren (49). Mat-
ningens kamhjul (K) skall rotera moturs. Om ej så
är fallet är anslutningskablarna förväxlade.
8. Stoppa matningen och kontrollera var slipskivan
går ner mot sågbandet.
9. Justera ratten (L) tills slipskivan precis tangerar
insidan på sågtanden (M). Ev. måste punkterna 7
och 8 ovan upprepas.
10. Ställ lyftaren (N) i aktuellt hål i hävarmen (O) och
starta matningen. Justera ratten (P) tills slipskivan
precis tangerar hela tanddalen under matningen.
11. Stoppa matningen och vrid båda rattarna 1/2
varv moturs.
OBS! Slipa ej för kraftigt. Detta kan förstöra härd-
ningen på tänderna. Varje varv på justeringsskru-
varna motsvarar 0,75 mm slipdjup. Max. slipdjup per
slipning 0,1-0,2 mm. Om bandet är mycket slitet,
slipa flera gånger.
Varning!
risk för att slipskivan lossnar och
orsaka personskada. Se till attströmför-
sörningen är kopplad så att slipskivan
roterar åt rätt håll, dvs slipning sker
nedåt-bakåt.
!
Varning!
risk för skada på slipskiva eller på såg-
band, vilket kan leda till personskada.
Slipskivan får ej vara igång under pro-
ceduren enligt punkt 8-11 nedan.
!