Preparing a UTREL30-WiFi for first use
UTREL30-WiFi User Guide
19
The first screen you see
shows the dashboard.
Tap the gear icon (
) to
show the
Devices
screen.
Tap Register Device, then scan
the barcode on your UTREL30-
WiFi
2
.
At this point, plug the power supply into the UTREL30-WiFi. When you connect a
UTREL30-WiFi to power for the first time, the logger's Bluetooth function will be
activated automatically, allowing your smart device to connect. No specific pairing action
is required. The logger should show the following display:
If the display does not show
bt
, you can activate the Bluetooth function by pressing and
holding the
Channel/
FUNCTION
button until
bt
appears.
2
Please note that lighting conditions can affect the ability of your smart device to scan the barcode, as does the quality of the
camera in your device. If you are unable to scan the code, please type the serial number into the field provided.
