Starting the Logger
UTREL30-WiFi User Guide
50
and the logger can now be started again as normal.
The UTREL30-WiFi will
not
be reset if you
l
release the button before
STARTING
disappears; or
l
keep holding the button until
STOPPED
disappears.
Automatic date/time start
If you configured the UTREL30-WiFi for a date/time
start, it will start recording temperature values as
soon as the entered start time is reached. Until
then, the logger will display the screen on the right.
Once the configured start time is reached, the
logger shows the normal recording display.
The UTREL30-WiFi will perform a
Connection Test
as soon as the recording has started.
To check the connection before the start time is reached, you can initiate the connection
test yourself. Please refer to
Testing your wireless and network connection (on page 34)
.
Hibernating the logger using LogTag
®
Analyzer will abort any previously
configured Date/Time start.
