Stopping the UTREL30-WiFi
UTREL30-WiFi User Guide
66
Stopping the UTREL30-WiFi
Automatically
The UTREL30-WiFi automatically stops recording temperature when the maximum
number of readings specified during configuration has been reached.
Manually
You can configure a UTREL30-WiFi so it can be stopped with the
START
/CLEAR/STOP
button. When you receive the unit, the stop function is typically disabled. You can
enable it in the
tab during configuration. When enabled, you can stop
the unit as follows:
Press and hold the
START
/CLEAR/STOP
button.
STOPPED
is shown in addition to the
symbol.
Keep holding the button until the
symbol
disappears, then release the button within 2
seconds.
STOPPED
is shown permanently on the display and
the logger will no longer take readings.
The last recorded temperature is now no longer
shown, but minimum and maximum trip values
remain.
The logger will
not
stop if you
l
release the button before the
symbol
disappears; or
