Stopping the UTREL30-WiFi
UTREL30-WiFi User Guide
67
l
keep holding the button after
STOPPED
remains permanently on until the
symbol reappears.
The UTREL30-WiFi will now connect to LogTag
®
Online to upload any outstanding
temperature readings.
Once the logger has stopped, the last alarm status before the logger stopped will
continue to be indicated with a cross or a tick symbol on the display, for each
channel, but the audible alarm and the alarm LED will turn off (see exception
).
If an ALARM is present ( ) and the
Clear alarm by pressing STOP button
function is enabled, you will need to clear the alarm first before you can stop the
logger. Please see
for more information. In this case, a tick
will be shown for the alarm status once the logger has stopped.
Once the unit is stopped, you need to re-configure it with the app or with LogTag
®
Analyzer, unless the option
Allow reset of logger with Start button
is enabled. See
Resetting the Logger on page 77
.