Hibernating a UTREL30-WiFi
UTREL30-WiFi User Guide
78
Hibernating a UTREL30-WiFi
When hibernated, the logger’s power consumption is near zero. Hibernating a logger is
useful for conserving battery life when the logger is not used for extended periods.
If you hibernate the logger for longer than a week, please remove the AAA batteries
from the logger to avoid them leaking.
UTREL30-WiFi loggers are placed into Hibernation using LogTag
®
Analyzer by clicking
Hibernate
from the
LogTag
menu.
Initially, the display shows
SLP
on the display until
you remove the logger from the USB port.
A hibernated logger has no active display, however
a button press will wake the logger up briefly. The
display will show
l
the text
NOT READY
; and
l
the battery capacity of the AAA batteries (if
the batteries have been removed, the empty
symbol
will be shown).
After a few seonds
SLP
will be shown on the display,
and the display will turn off.
The logger reverts to being hibernated.
A hibernated logger cannot be reactivated via the buttons - it must be
reconfigured with LogTag
®
Analyzer, or the app.
