Page 8
Starting your VFC400-USB
Press and hold the
START/
Clear/Stop
button.
STARTING
will appear along
with
READY
.
Release the button once
READY
disappears.
The VFC400-USB now records
temperature data.
The Logger will
not
start if:
•
You release the
button before READY
disappears.
•
You keep holding the
button for more than 2
seconds after READY
disappears.
•
The backup battery is
critically low and the
logger is not connected
to power.
Please ensure you have connected an ST100X external probe to
your device before starting.
Please ensure you have connected an ST100X external probe to
your device before starting.