OWNER’S MANUAL
18
Compact Scooter
11. Transportation
Packaging
To re-package the mobility scooter and prevent it from moving or being
damaged in the package, follow the below steps:
1. Put the scooter into the prepared carton (Photo 11.1), like the position in
Photo 11.2.
2. Cover the carton and fix the whole carton with professional ropes for
packaging. (Photo 11.1 and Photo 11.2).
Important
Our cartons comply with GB/T4857.18 (equals to ISO4180/2):
1. Comply with test dropping from 500mm height
2. Pass transport testing requirements of 2.5m stacking
Notes
1. Please make sure there is no any obvious damage to the outside of the
carton or serial no. before opening it.
2. Reverse the packaging steps to get the scooters, owner manual, warranty
card, inspection report or quality certificates, and so on.
3. Read the owner’s manual carefully to familiar with assembling or operating
your scooters.
4. Turn on the scooter and check whether it is normally operated.
17
Packaging
We package the mobility scooter may prevent it from removing in the
package, shaking in the package or any scratch, by following the below
steps:
1, put the scooter into the prepared carton (Photo 11.1), like the position in
Photo 11.2.
2,Cover the carton and fix the whole carton with professional ropes for
packaging.(Photo 11.1 and Photo 11.2).
(P11.1)
(P11.2)
(P11.3)
(P 11.4)
Important
Our cartons comply with GB/T4857.18(equals to ISO4180/2):
1.Comply with test dropping from 500mm height
2. Pass transport testing requirements of 2.5m stacking
；
Notes
1, Please make sure there is no any obvious damage on the outside of the
carton, crushed area or serial no. before open it.
2, reverse the packaging steps to get the scooters, owner manual, warranty
card, inspection report or quality certificates, and so on.
3 read the owner’s manual carefully to familiar with assembling or operating
your scooters.
4 turn on the scooter and check whether it is normally operated.
11.
Transportation
ver 2019.05.30E
