35
Conducted RF
IEC 61000S-4-6
Radiated RF
IEC 61000S-4-3
3 Vrms
150 kHz to 80
MHz
3 V/m
80 MHz to 2.5
GHz
3 Vrms
3 V/m
Portable and mobile RF
communications
equipment should be
used or closer to any
part of the
（
SW-1000Sscooter
）
,
including cables, than
the recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation distance
d =
P
2
.
1
d =
P
2
.
1
80 MHz
to 800 MHz
d =
P
3
.
2
800 MHz
to 2.5 GHz
Where P is the
maximum output power
rating of the transmitter
in watts(W) according
to the transmitter
manufacturer and d is
the recommended
separation distance in
the meters( m).b
Field strengths from
fixed RF transmitters,
as determined by an
electromagnetic site
survey, should be less
than the compliance
level in each frequency
range.
Interference may occur
in the vicinity of the
equipment marked with
the following symbol:
OWNER’S MANUAL
36
Compact Scooter
Conducted RF
IEC 61000S-4-6
Radiated RF
IEC 61000S-4-3
3 Vrms
150 kHz to 80
MHz
3 V/m
80 MHz to 2.5
GHz
3 Vrms
3 Vm
Portable and mobile RF
communications
equipment should be
used no closer to any
part of the Limosa
scooter, including
cables, than the
recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation distance
d = 1.2 P
d = 1.2 P 80 MHz to 800
MHz
d = 2.3 P 800 MHz to 2.5
GHz
Where P is the
maximum output power
rating of the transmitter
in watts(W) according to
the transmitter
manufacturer and d is
the recommended
separation distance in
meters (m).
Field strengths from
fixed RF transmitters, as
determined by an
electromagnetic site
survey, should be less
than the compliance
level in each frequency
range.
Interference may occur
in the vicinity of the
equipment marked with
the following symbol:
ver 2019.05.30E
