4
Usage
(cont’d)
Using the Chest Belt
Both the knee belt and chest belt
should be secured before standing
in your Setonix chair. To secure the
chest belt, wrap the belt around
your chest and both of the back
canes. Connect the plastic clips
and pull the adjustment straps so
the the belt is tight against your
body. Improper use of the knee belt
can lead to injury or death.
Standing
To stand in your Setonix chair, first
ensure you are on a level surface. If
you haven’t already, be sure that
the knee and chest straps are
correctly secured. Start by
engaging the breaks to avoid rolling
in the standing position. Once
ready, press the “up” arrow on the
hand control (fig. 2). The chair will
gently raise into the standing
position.
Returning to Seated Position
To return to the seated position,
press the “down” arrow on the hand
control until the chair has
completely returned to the seated
position (fig. 2). You may now
disengage the brakes and return to
propelling.
Using the flip-back armrests
The Setonix armrests flip back for
transfers, but are available for
added stability and security when
standing. To flip back the armrests,
simply push them up until they swing
back completely (fig. 3). Push them
forward again to bring them back
down to the original position.
OWNER’S MANUAL
Manual Wheelchair with Power Standing
UP
DOWN
fig.2
fig.3
ver 2019.08.14E
