Freedom
User Guide V1.02
9
3.1.1 Universal AC USB Wall Charger Safety Information
Connect the Universal AC USB Wall Charger only to designated AC socket outlets available
in the designated country, according to the AC sockets supplied with the product.
Ensure that the Universal AC USB Wall Charger is correctly secured in the AC socket outlet
and that the USB power cord is positioned so that it will not be subjected to damage or
stress.
To reduce risk of electric shock, unplug the unit from any power source before attempting to
clean it.
Do not expose the Universal AC USB Wall Charger or adapter to direct sunlight or use it in
places with high humidity, such as a bathroom.
Never alter the cord or plug. Do not damage the power cord by bending, twisting, pulling, or
heating.
Do not pull on the connected data cable in order to remove the charger plug from a socket.
Grasp the plug directly when unplugging the charger to avoid causing any damage to the
cable.
Do not use the plug if it is loose as it may cause a fire or electric shock.
Do not use a damaged or worn charger. The use of a damaged or worn charger could result
in electric shock, burns or fire.
Do not touch the pins of the plug when connecting or disconnecting it from a power source.
When the charger is not in use, disconnect it from the power source
Use only the original chargers intended for use with the
Freedom
Charger Base. Other
chargers may not be designed to the same safety and performance standards.
Only use the Universal AC USB Wall Charger provided. The warranty will not be applied to
products provided by other suppliers.
3.1.2 Safety Precaution for Batteries
Both the
Freedom
watch and Portable RF Receiver contain a Li-Ion Polymer battery. Do not
disassemble, crush, puncture, short external contacts, expose to temperatures above 60°C
(140°F), or dispose of in fire or water. Failure to follow these instructions may cause the battery
to leak, catch fire, or explode. Avoid dropping the
Freedom
watch or Portable RF Receiver. If
the
Freedom
watch or Portable RF Receiver is dropped, especially on a hard surface, and the
user suspects’ damage, take it to a service centre for inspection.
3.1.3
Freedom
Battery
When charging the
Freedom
watch and Portable RF Receiver for the first time,
it is advised that
you charge both device until the display on the Portable RF Receiver indicates that both battery
displays are at 100%. The charging process can take up to 2 hours.
Like any battery operated device, the more you use it the shorter the battery life is of the
devices.
The expected battery life of the
Freedom
watch, when in proximity (RF Mode) is 30 days.
The expected battery life of the
Freedom
watch, when outside proximity (Alert Mode) is 24-
48 hours in GSM standby; 5 hours in Live Track with intervals of 10 minutes.
The expected battery life of the Portable RF Receiver is 5 days in standby.