Freedom
User Guide V1.02
22
4.4 Setting the Proximity Range of
Freedom
It is possible to change the range / radius of the proximity zone of your
Freedom
by changing
the RF power output of the Portable RF Receiver to High, Medium or Low.
This will typically alter the ranges as follows:
Indoor
Ranges
, typically:
Low
:
10 - 20m
Medium
: 20 - 30m
High
:
40 - 50m
Outdoor
Ranges
, typically:
Low
:
20 - 30m
Medium
: 40 - 50m
High
:
80 - 100m
The Indoor and Outdoor Ranges are just an indication and may vary because of
obstructions like buildings; landscapes; etc.
The proximity zone should be viewed as the radius of a circle around the Portable RF Receiver.
The recommended method to determine the estimated range is to place the Portable RF
Receiver on the Desk-top Charger Base Station and move
Freedom
away from the Portable RF
R
eceiver to the maximum distance required, before a “wandering event” is alerted.
Please note that the solution is defaulted to the High setting. If it does not alert after the
required range, then you will have to reduce the power output of the Portable RF Receiver.
This can only be done whilst the watch and portable receiver are within range.
The proximity range of
Freedom
can be changed / configured as follows:
If the
Freedom
watch
is not within proximity of the Portable RF Receiver, no changes
will be processed by either device.
Follow the following steps on the Portable RF Receiver to changed / configured of the proximity
range of
Freedom
watch:
Press
UNLK
to unlock the keypad