8
Safety First
Document Number: 814212-2.0-ENG
Original Document
Loma X-Ray Inspection Systems are designed to be used in an industrial environment for
detecting contaminants and over/underweight products presented in packaging. Any
improper use could invalidate the EC Declaration of Conformity issued with the system and
also the system warranty. This section provides further details.
Generally in an industrial environment some background noise is present due to the
operation of electrical equipment and mechanical movements of machinery such as
conveyors and electrical noise. In general operation, Loma X-Ray Inspection Systems do not
emit a level of noise that is hazardous.
The Waste Electrical and Electronic Equipment recycling (WEEE) Regulations 2006 and the CE
Directive 2002/96/EC require that electrical and electronic equipment must be recycled at
the end of its useful life. This section provides some guidelines.
This section lists the potential emergencies that may be encountered and the associated
procedures.
If your business is operating under an approved Quality Management System, all activities
covering the safe operation and maintenance of the X-Ray Inspection System will need to
be incorporated into the system to ensure continued compliance. This section provides some
guidelines on what needs to be considered.
This section contains details of the End User Licence Agreement for the system software.
