22
1. Grip firmly and release the clutch handle 2 to 3 times to confirm the working performance of the clutch.
If it is abnormal, readjust the clutch.
2. If the clutch’s work is still abnormal after several times of adjustment, it can be confirmed that the wear
of clutch forks or friction disks is too heavy, and the mini tiller’s friction disks or clutch forks shall be replaced
with new ones by an authorized service shop.
3. Never try to detach the clutch by yourself, or the clutch or other parts or components may be damaged.
iii. Method of adjusting accelerator cable
If the engine’s accelerating or decelerating performance is not good when you turn the accelerator valve
regulator lever, please adjust the accelerator cable right away; you can refer to Chapter III for method of
adjustment.
Note:
Turn the accelerator valve regulator lever 2 to 3 times to confirm the engine’s accelerating and
decelerating performance.
iv. Method of using and adjusting handle pipes
According to your height and the special requirements of your farming, the handle pipes can be adjusted
appropriately in four directions: up, down, left, and right.
Method of adjustment (see Figure 7)
1.
Upward and downward adjustment of handle pipes
Figure 7
Lifting handle
Tool box
(Hand start)
Lifting handle
Handle adjusting nut
Handle pipe connecting
