16
Bolt to secure engine bracket and engine
35~40
2. Check whether handles of operating system, namely the handles for accelerator, clutch, gear shift, and
reverse shift can work freely, and whether any of them cannot reach any required position, if so, check to
repair it.
3. Put the shift lever of the transmission box in the neutral position.
4. Filling of engine oil.
Put the engine on a horizontal place.
1) Loosen out the dip stick of the engine, and wipe it off (see Figure 5).
2) Put the dip stick into the oil filler hole (don’t engage the thread)
3) Take out the dip stick to check oil level; if the oil trace is between the upper and lower marks of the
oil stick, the oil level is acceptable.
4) The SAE15W-40 engine oil is the recommended general-purpose lubricant, and it is applicable to a
common ambient temperature (see Table 1).
5) Fill the reduction box with SAE15W-40 engine oil. Put the whole machine in a horizontal position,
and fill the oil in from the oil filler hole on the upper side of the reduction box. If you want to check
engine oil level, put the dip stick in transmission box but don’t
rotate it. The normal oil level shall be between the upper and lower
limits of the dip stick (see Figure 6).