background image

 

 

 
 

The engine exhaust from this product contains 
chemicals known to the State of California to cause 
cancer, birth defects, or other reproductive harm.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The safety alert symbol 

(

             

)

 is used to identify safety information about hazards that can 

result in personal injury.   
 
A signal word 

(WARNING

,

 DANGER

, or 

CAUTION)

 is used with the alert symbol to indicate the 

likelihood and the potential severity of injury. In addition, a hazard symbol may be used to 
represent the type of hazard. 

WARNING

 indicates a hazard which, if not avoided, 

will result in death or serious 

injury. 

 

DANGER

 indicates a hazard which, if not avoided, 

could result in death or serious 

injury. 
 
CAUTION

 indicates a hazard which, if not avoided, 

might result in minor or moderate 

injury. 

 

When used without the alert symbol, indicates a situation that could result in damage to 

the engine. 
 

 

 
 
 
 
 

CAUTION

:  

We are not necessarily know what equipment this engine will power. For that 

reason, you should carefully read and understand the operating instructions for the equipment on 
which your engine is placed.

   

 
 
 
 
 

                   

                    BEFORE OPERATING ENGINE 

 

 

z

 

Read entire Operating 

Maintenance Instructions AND 

the instructions for the equipment this engine powers.

 

z

 

Failure to follow instructions could result in serious injury 
or death.

 

THE OPERATING 

 MAINTENANCE INSTRUCTIONS CONTAIN 

SAFETY INFORMATION TO 

z

 

Make you aware of hazards associated with engines 

z

 

Inform you of the risk of injury associated with those hazards,and 

z

 

Tell you how to avoid or reduce the risk of injury. 

THE INTERNATIONAL SYMBOLS USED ON 

THE ENGINE OR IN THIS MANUAL INCLUDE: 

 

WARNING

Summary of Contents for LC1P61FA
























Reviews: