User Manual
Manuel de l’Utilisateur
HOW TO OPERATE:
1. Set the slide switch to 'AUTO', which will put the machine on standby. Insert paper
vertically into the entry. The machine should start up automatically and continue
shredding. It will return to standby automatically.
2. After shredding, if there is paper remnants left in the entry, press the "clear" button to
get rid of the paper completely.
3. If a jam occurs by inserting too much paper, or if you want to withdraw the paper
immediately, slide switch to 'REV'. The machine does the reverse rotation for about 1
second and returns the paper that has not been shredded.
4. To cut credit cards, set the switch to the 'REV' position. Insert the credit card vertically
into the entry, returning the switch to the 'OFF' position when finished.
5. To ensure your machine has a long use life and exerts good shredding function, please
adhere to the maximum number of sheets that can be shred at one time. Shred one
credit card at a time.
6. Do not exceed more than 3 continuous cycles. One cycle is as follows: work continuously
for 2 minutes; rest for 4 minutes.
7. If the machine works continuously or spasmodically for a long time, it may pause
because the inside temperature increases. After resting for a period of time, try again.
8. Do not put paper clips, adhesive paper, tape, or clothes into the paper entry in order to
avoid damaging the blades or lowering the shredding performance.
9. If you want to clean the wastebasket or the machine, turn off the electric power and
unplug the machine.
SAFETY OPERATION GUIDE:
1. Before use, please read introduction manual carefully.
2. Keep ties, jewelry, hair, etc. away from the machine to insure personal safety.
3. Do not place the machine near heat sources or in a humid environment for a long time.
4. When cleaning the machine, unplug it from the electric socket first.
5. Keep machine far away from children and pets.