background image

 
FCC Statement 

 
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:  
(1) This device may not cause harmful interference   
(2) This device must accept any interference received, including interference that may cause 
undesired operation. 

 
Warning!

 This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense. 

 
 

 
CE-Mark Warning 

 

In a domestic environment this product may cause radio interference in which case the user 
may be required to take adequate measures. 
 
All Trademarks and trade names are the properties of their respective owners. 
 
Copyright © 2008, All right Reserved. 

 
 
 
 

Summary of Contents for LCS-8037TXR2









Reviews: