page 17
Parking locking function
The CARVY can be secured with the brake lever to avoid that it will roll on skew or sloping surfaces when
it is switched off. By pulling the brake lever and securing it with the additional switch, the front brake will
be locked and keep the scooter on its place.
Before going for a ride please make sure that you always release the locking of the front brake.
Unlocked:
Locked:
Lights
The rear LED light is always switched on automatically when the CARVY is in use.
The front power LED light must be switched on with the additional ON/OFF switch when the weather
conditions offer bad visibility or it is getting dark. We recommend to switch on the lights always.
Adjusting the height of the handlebars
The height of the handlebars can be adjusted to the users demand.
Just open the upper quick release to pull the handle bar to the desired height and secure it by closing the
quick release again.
NOTE:
For folding the scooter and to attach the handle bar to the rear clamp it is required to set the height
of the handle bar to the printed “folding position” mark on the handle bar.
Press!
