page 19
Storage
The CARVY should be stored at a temperature between 0°C and 30°C, and at a level of humidity
lower than 75%RH.
The battery should be stored in a clean, dust-free, dry and aerated room.
Do not touch the corrosive liquid contained in the battery and keep the battery away from heat
and flames.
The battery should be stored at a loading capacity of 50% to 70% and the charge in the battery
should be checked every 30 days. The CARVY should be switched off when stored.
Common problems
and how to solve
them
Failure
The battery is not charging any more:
Cause
The overload protector is on.
Solution
The battery is full and ready to use.
The battery will not charge at all:
Charger connection problem.
Check that there is no problem with the
charger connection, and that the plug is
pushed in to the socket as far as it will go.
The power has suddenly decreased:
The electricity overload protector is
activated.
It should work again once it has cooled
down or under normal load.
The motor switches off:
Overload. The motor overload protector
is on.
Allow the motor to cool down for a few
minutes, the overload protector will switch
itself off automatically.
No output voltage:
The discharge protector is on and
protects the battery against discharging
too much
Charge the battery fully
.
.
