CDM816D WHEEL LOADER
13
and air.
18.
Check the monitoring instrument for normal
operation.
●
●
●
●
●
●
●
19.
Check the parts for abnormal noise and
overheating.
●
●
●
●
●
●
●
20.
Check the tyres for pressure, crack or
abnormal wear.
●
●
●
●
●
●
●
21.
Check the switch, pedal, handle and button
for normal operation
●
●
●
●
●
●
●
22.
Check the bolts and nuts at all parts for
looseness or shedding.
●
●
●
●
●
●
●
23.
Check especially bolts of rim, drive shaft and
axle bolt for looseness.
●
●
●
●
●
●
●
24.
Remove the pollutants on surface of water
tank and radiator.
●
●
●
●
●
●
25.
Check the fastening bolts of brackets of
transmission and engine.
●
●
●
●
●
●
26.
Check the working device, frame and outer
parts for cracks.
●
●
●
●
●
●
27.
Check the control levers for flexibility and
apply the lubricating grease.
●
●
●
●
●
●
●
28.
Apply lubricating grease at the hinged points
and hinge pin sleeves.
●
●
●
●
●
●
●
29.
Apply lubricating grease at points such
asdrive shaft and fan shaft.
●
●
●
●
●
●
●
30.
Check the hydraulic oil level and refill if
necessary.
●
●
●
●
●
●
31.
Replace the hydraulic oil filter element, clean
the tank and change the oil.
●
▲
▲
32.
Check the gear oil level of drive axle or
change the gear oil.
●
▲
▲
▲
33.
Check and repair the front and rear axles,
differential and wheel reducer.
●
Always operate the machine as per the label;
otherwise, machine damage or personal
injuries may be caused.
1.5 Other safety information
1.5.1
Compliance with safety instructions
1.5.1.1 Before the maintenance of equipment, hang a safety warning label on the starting switch or
control handle, such as "No Operation".
1.5.1.2 Get to know the width of operating machine to keep a distance with the fence or boundary
obstacle when working around them.
1.5.1.3 Beware of the buried high-voltage wires and cables. The crash between the machine and
these dangerous objects may cause casualties due to an electric shock.
1.5.2
Safety precautions