Operation Manual
22
repeatedly depress the pedal;
1.5.23.11
The braking capacity of the brake is limited. To ensure safety, when the vehicle walks
down the slope, never shut the engine down, perform gear shift or put the transmission in neutral
position, but use the engine as the brake;
★
Battery:
1.5.23.12
The battery is installed in the battery case on the counterweight at the rear of the
machine. There are two batteries, one for one side;
1.5.23.13
The battery contains electrolyte, which is an acid substance. Injury may be caused if the
electrolyte comes into contact with the skin or eyes. Wear safety goggles and gloves during
maintenance of battery;
1.5.23.14
The battery will emit flammable smoke and mist. Do not smoke when checking
electrolyte level and keep good ventilation;
1.5.23.15
Prevention of danger:
The battery electrolyte is an acid substance, which may produce hydrogen. Therefore, improper
handling of battery may result in burn or fire; In order to keep safe, you must take the following
precautions:
1.
Do not expose the battery to a lit cigarette or open flame;
2.
When contacting battery or performing maintenance, please wear rubber gloves and protective
goggles;
3.
If electrolyte spills on cloth or skin, wash it immediately with plenty of water;
4.
The electrolyte can cause blindness, and if it splashes into your eyes, immediately wash them
with plenty of water and go to see a doctor as soon as possible;
5.
In case of accidental electrolyte ingestion, you should drink plenty of water, milk, raw eggs or rape
oil, and immediately turn to emergency center for help;
6.
Before performing any work related to the battery, shut down the engine;
7.
A short circuit occurring between positive terminal (+) and negative terminal (-) of a battery will
cause heating or even explosion. Avoid contact of metal object (like repair tools) with battery, which
can cause a short circuit;
8.
When installing a battery, first connect positive terminal; while disconnecting battery, disconnect
negative terminal (ground wire side) first.
9.
Before removing or installing battery, first check for positive and negative terminals. After installing,
make sure to tighten nut firmly to prevent failure due to loose electrode;
10. Only use dry cloth to wipe battery. Do not use organic solvent or cleaning agent like gasoline;
11. Remove battery from machine before charging;
12. Do not charge a battery with frozen electrolyte or start the engine with other power. Otherwise, the
battery is easy to catch fire and explode; when charging or start the engine with other power, melt the
