Operation Manual
38
Fig. 2-5
(3) Handling
Self-handling is adopted in the following cases:
①
The road is soft, the place is not flattened, and it is impossible to use freight vehicle.
②
The handling distance is within 500m and it is a waste of time to handle with freight vehicle.
The handling speed depends on the road conditions. To ensure the safety, stability and good sight
during operation, make the bucket rotate upward to the extreme position and keep the lower hinge
point of boom in the transport position (about 300 mm above the ground).
(4) Unloading
When unloading materials to the freight vehicle or yard, the boom should be lifted to the height that the
bucket cannot contact the trunk bed or stockpiles when turning forward, and push the tilt control lever
forward to tilt the bucket forward for unloading, and the materials can be unloaded completely or partly
by controlling the tilt control lever, and keep slow and gentle when unloading to reduce materials
impact to the vehicle.
When the materials stick to the inside of the bucket, turn the control lever back and forth to shake the
bucket so that the stuck materials may fall off, as shown in Fig. 2-6.
