Operation Manual
4
1.1.17
The model shall not work in a contaminated environment.
1.1.18
The model does not apply to the environment subject to falling objects.
1.1.19
Always check the operating handle before starting the machine to ensure that the handle is at
the neutral position.
1.1.20
The left door of cab is for entrance/exit (the forward direction is positive) and the right door is
for emergency exit.
1.1.21
Lower the boom and bucket on the ground before shutting down the engine except in special
conditions.
1.1.22
Properly support the lifted boom (if required) during repair.
1.2 Safety labels
1.2.1
There are special safety labels sticking to your machine, and their accurate location and
corresponding dangers will be described in this part in detail. Please familiarize yourself with the safety
labels before operation.
1.2.2
Ensure that all safety labels are clear and legible.
1.2.3
Clean or replace the illegible safety labels.
1.2.4
Replace the label with illegible icon.
1.2.5
To clean the safety labels, use cloth, water and soap instead of solvent, gasoline or other
aggressive chemicals which may cause adhesiveness loss of the sticking agent for label application
and even shedding of safety labels from the machine.
1.2.6
Replace any damaged and missing safety labels.
1.2.7
If the replaced part is applied with safety label, reapply the label on the new part.
1.2.8
Various brand-new safety labels are available at any LONKING after-sales facilities.
1.3 Understanding signal words
1.3.1
On safety labels, the words indicating the danger degree - DANGER, WARNING or
CAUTION - are used together with the safety marks. "Danger" refers to the immediate danger and
may cause death or serious personnel injury if not avoided.
1.3.2
“Warning” refers to the existence of potential
dangers, which may cause casualties if not avoided.
Fig. 1