19
1.4.4 WORKING CLOTHES AND PERSONAL PROTECTIVE EQUIPMENTS
Avoid wearing loose clothes and ornaments or
other things that may hook control level or other
machine parts, for they may be blocked or
engulfed in control system or moving parts, and
cause severe injuries or casualties.
Do not wear greasy clothes to avoid catching a
fire.
Wear safety helm, glass, shoes, mask and gloves
before operating or maintaining the machine.
Wear safety dust goggles, Safety Helmets and
thick gloves when working in conditions of metal
pieces or slight sundries, especially when nail pin
with hammer or clean air filter impurities with
compressed air, and make sure no person
approaches the machine.
Compressed air may cause human injuries;
therefore, it is important to wear mask, protective
clothes and safety shoes before using the
compressed air. The maximum pressure of
compressed air using clean shall be under
0.3MPa.
Check whether all protective equipment are in
normal work conditions.
1.4.5 GETTING ON AND OFF THE MACHINE
Before ascending or descending machine, clean
oil dirt, lubricant or mud, furthermore, repair
damaged parts and tighten loose bolt.
Do not jump on or off the machine, either when it
is at rest and when it is moving.
When ascending or descending the machine, you
shall face to the machine, hold armrest, step on
ladder and keep three points contact (two feet
and a hand or two hands and a foot) to make sure
body balance and stable.
It is prohibited to hold control level when
ascending or descending the machine.
It is prohibited to cab from back of machine or
descend machine by stepping side tires.
