23
Properly support equipment or accessory when
working underside the machine. Do not relay on
hydraulic cylinder for supporting. If the control
mechanism moves or hydraulic pipeline leaks,
any attachment will fall off.
Unless otherwise specified, make no adjustment
when the machine is operating or the engine is
starting.
Be sure to keep away from all rotating and
moving parts.
Be sure that there is no debris in the engine fan
blades.
1.4.12 ETHER (IF YOUR MACHINE IS EQUIPPED WITH ETHER COLD
STARTING DEVICE)
Ether is toxic and flammable, inhalation of ether
vapor or frequently contact it with skin may cause
injury. When using ether, make sure the place is
in good ventilating conditions and pay attention to
prevent fire. Do not smoke when replacing ether
cylinder.
Do not store ether cylinder in living areas or
inside the cab. Do not put ether cylinder in an
area of direct sunlight or the place where the
temperature is more than 39
℃
(120°F).
Please put the waste ether cylinder in a safe
place, do not perforate or burn it.
Lay the ether cylinder away from non-staff areas.
1.4.13 MAKE SURE A GOOD VENTILATION WHEN OPERATING IN AN
ENCLOSED SPACE
If it needs to start the engine or handle fuel, clean parts or paint in an enclosed or bad
ventilated place, open the doors and windows to ensure that this is adequate ventilation to
prevent gas poisoning.
If the opening doors or windows still cannot offer an adequate ventilation condition, please
install a fan.
