24
1.4.14 PIPELINE, HARD PIPE AND FLEXIBLE PIPE
Do not bend or hammer high-pressure pipeline,
do not install abnormal bending or damaged pipe
or tube on the machine. Repair loose or damaged
fuel and lubricant pipeline and pipe or tube
installed in hydraulic system.
Leakage may cause fire. For repair or
replacement, please contact the designated
dealer of LONKING Holdings Limited.
Please carefully check all pipelines, hard pipes
and flexible pipes, tighten all joints according to
specified tightening torque. Do not check the
leakage with bare hands, but check them with
board or cardboard.
Even a pinhole size pressure liquid leakage may
penetrate muscle and cause death. If the solution
sprays out to the skin, please contact with
surgeons who is familiar with this injury for cure
within a few hours. If the following faults
happened, the parts shall be replaced:
1) connector damaged or leaked; 2) outer layer of
the tube worn or cut and strengthening steel wire
bare; 3) local uplift of the tube; 4) the tube has
obvious torsion or deflection; 5) strengthening
steel wire of the tube embedded in outer layer; 6)
end connector dislocation.
Make sure that they has been installed correctly
such as all pipe clamps, protecting plates and
heat resistant cover to avoid shock or overheating
due to the friction with other components.
When removing connecting pipe of A/C
compressor, no open fire closing, otherwise it will
produce toxic gases and cause poisoning.
