35
machine may collapse the soft soil that cause machine turnover.
When there is danger of falling rocks at site, the machine shall be equipped with falling
objects protection device (FOPS).
When there is danger of falling rocks and potential turnover trend at site, install falling
objects protection device (FOPS) and tie the safety belt.
1.6.5 PRECAUTIONS WHEN PARKING THE MACHINE
Park the machine on the even ground, and then
lower working device down to the ground where
there shall no falling rocks or sliding danger, and
there also shall no flood if it is low terrain.
If it is necessary to park the machine on the
slope, place a wedge under the wheels to prevent
the machine moving, and then drop the working
device down to the ground.
When parking the machine on the road, it is
necessary to set up fences, signals, flags or
warning lights and other necessary signals to
ensure the machine can be seen clearly.
However, the machine, fences and flag shall not
affect other vehicles passing through the road.
Before leaving the machine, fully lower the bucket
down to the ground, lock up joystick with locking
device, shut down the engine, and pull up the
parking brake switch to the “brake” position. Lock
all equipment with keys, and remove and carry
the keys.
1.6.6 PRECAUTIONS WHEN LOADING THE MACHINE
When loading or unloading machine, the engine
shall be ran at low speed, while the machine shall
walk at low speed.
Loading or unloading of the machine shall
progress on solid and even ground, and keep a
safe distance from the roadside.
Fix the carrying truck when loading or unloading
the machine, and place a pad block under the
