39
1.6.11 PRECAUTIONS FOR BATTERY CHARGE
If use the wrong method to charge the battery, it
may cause battery explosion. Therefore, it is
important to abide by the related charge
regulations and instructions stipulated in the
manual and note the following tips.
Choose a well-ventilated place to charge the
battery. Remove the battery cap to release
hydrogen gas and prevent explosion.
Set the charger voltage value to be consistent
with battery voltage value. If the voltage is
wrongly set, it may cause charger overheating or
fire and explosion.
Connect the charger’s positive (+) clip to positive
(+) terminal of battery, correspondingly, connect
negative (-) clip to negative (-).
If the charge rate of the battery is less than 1/10,
perform high-speed charging and set the values
below the rated capacity of the battery. If the
charge current is too large, it may cause
electrolyte leakage or evaporation, which may
catch fire or cause explosion.
1.7 MAINTENANCE PRECAUTIONS
1.7.1 FAULT NOTIFICATION
If processing maintenance has not mentioned in
User Manual
, it can lead to unexpected
fault. Then please contact to designated dealer of LONKING Holdings Limited for repair.
1.7.2 CLEANING BEFORE REPAIR AND MAINTENANCE
It needs to clean up the machine before repair
and maintenance. This ensures that no waste
enters into the machine, as well as the smooth
and safe process of maintenance
When performing cleaning, pay attention to the
following items:
1. Wear non-slip shoes to prevent falling down
