43
Fuel, lubricant and the other inflammable should
be stored far away from open fire.
Do not use diesel or gasoline, for it has risk of
lighting; use incombustible material as detergent
for cleaning the parts.
Smoke at the designated place. Smoking is
prohibited when overhaul or maintenance is
performed.
Use explosion-proof feature of the lighting
equipment to check fuel, lubricating oil, or battery
electrolyte, Prohibit use lighters or matches to
light.
When do grinding or welding operation on the
frame, move all the flammables to a safe place.
There should have a fire extinguisher in repair
and maintenance work site.
1.8.6 PERSONS FOR REPAIR AND MAINTENANCE
Only personnel with relevant qualifications can repair or maintain this machine. Personnel
unrelated with work of repair and maintenance is not allowed to enter working site. If
necessary, designate a person keep guard.
Pay special caution to keep your personal safety during grinding, welding or using of a
sledge-hammer and other operations.
1.8.7 ATTACHMENTS
Designate a person in charge when demounting or mounting a component.
It is not allowed for any non-staff to close to the machine or components.
Put the demounted components into a safe place and make sure they wound not fall.
Encircle the demounted components with a fence and put up a sign of “no entry” to avoid
prohibitive person entering this area.
1.8.8 MAINTENANCE UNDER MACHINE
Before maintenance or repair, stop the machine on a solid flat ground, lower the working
device to the ground and fix the tires with wedges;
Working under the poorly supported machine is prohibited. If the tires are off the ground
and the machine is only supported by the working device, maintenance under the
machine is very dangerous.
