58
CHAPTER III OPERATION INSTRUCTIONNS
3.1STEERING WHEEL
The articulated loader uses fully hydraulic power steering. The steering wheel is arranged
inside the Cab and connected to the full-hydraulic redirector. Turning clockwise the
steering wheel turns the loader right; turning counterclockwise the steering wheel turns
the loader left.
The fully hydraulic power steering has the
following features:
1. The turning angle of steering wheel
is not equal to that of the loader.
Continuously turning the steering wheel can
increase the turning angle of loader to the
expected value.
2. The faster the steering wheel is
turned, the faster the loader is turned.
3.
The steering wheel cannot automatically
return to its original position, thus the turning
angle of loader remains unchanged.
Therefore, when the turning of loader is
accomplished, it is necessary to turn the
steering wheel in the opposite direction, to
bring the loader to the straight ahead
direction.
3.2NEGATIVE-POLE SWITCH OF BATTERY
The battery negative-pole switch is arranged
at the left side inside of the rear hood.
The battery negative-pole switch differs from
the
starter
switch.
Shut
down
the
negative-pole switch will turn off the
electrical system of loader. When the starter
switch is disconnected, some electrical parts
of loader may still be working because the
battery still works within the electrical
system.
Shut down the battery negative-pole
switch :
To shut down the power supply to the
