99
Note:
1.
The steering bearings of the front and rear parts of the frame need to be checked after
working 5000 hours and replace it if any abnormal sound exists.
2.
The seat belt needs to be replaced once three years after the date of manufacture or
6000 hours after the date of operating (whichever comes first);
5.3 LUBRICATION CHART
Grease the lubricant at various sliding bearing or rolling bearing sections, such as:
1. Driving shaft with cross head.
2. All pin sets at both ends of the tanks.
3. Hinge pin sets of front and rear frame; sub-frame swing the pin sets.
4. Each pin sets of the working device
Inject grease into the above mentioned sections with pressure. Please note that inject
grease in time depending on the working status.
