121
mechanic oil over the exposure part of the piston rod of the hydraulic cylinder.
5. Dismount the battery and store it separately.
6. If the temperature drops down to below 0
℃
, add anti-freeze fluid into the engine cooling system,
and to fill the anti-freeze fluid to reach to the engine body and the evaporator of the air conditioner
system.
7. Drain out the water in the cooling system, please note to drain out the water in the evaporator of
the air condition system.
8. Start the car once a month, to run each system, and fill lubricating grease over all moving pins and
shafts, to ensure all moving parts to be lubricated. Before star the engine, remove the mechanic
oil over the piston rod.
5.12 MAINTENANCE UNDER SPECIAL CONDITIONS
Maintenance for the operation in mud, water or rain
Inspect the connections around the car to confirm whether there are loose joints, machine damage or
leakage.
After operation is completed, clean the mud, rocks, gravel, etc left on the machine; inspect the welding
seam to confirm whether there are cracks and whether there is loose; carry out daily lubrication and
maintenance.
If the car is working in acid rain or corrosive media, please flush to clean the affected parts with clean
water rinse.
The maintenance under heavy dust or very hot environments
Clean the air filter more frequently.
Flush the surface of the heat radiator to remove the embedded dust and dirt.
More frequent replacement of fuel filter.
If necessary, inspect and clean up the starter motors and generators.
The maintenance for the operation in rocky environment,
Inspect the wheel and tire assembly to confirm whether there is any damages or excessive wear and
tear.
Inspect joints and fasteners to confirm they are loose or damaged.
