28
Only when the operator sitting down to the seat that can start and operate the engine.
Make sure there is nobody in the cab except the operator.
It is not allowed that anyone
sits down on the body of the machine.
If the machine has not used for a long time or the operating temperature is extremely low,
please maintain your machine before start up.
Check whether all instruments and monitor displays are in normal condition before
starting the engine. Note whether there is noise and potential unsafe factor when running
the engine.
You can start the engine only in the cab. Prohibit strictly starting the engine with starter
motor short; otherwise, this may damage the machine’s electrical system, and this
operation itself is very dangerous.
It shall be guaranteed that a reversing alarm is in a normal working condition.
1.5.4 CHECK AFTER ENGINE STARTING UP AND BEFORE MACHINE
OPERATION
If there is no proper and timely check after the engine starts up, it is likely that the
abnormal condition of the machine cannot be identified, thus causing personal injury or
machine damage.
Check work shall be performed in a spacious place where there is no obstruction. Nobody
is allowed to approach the machine during checking.
Check whether the instruments and equipment, bucket, boom, brake system, power train
system and steering system are in a normal working condition.
Check whether the sound, vibration, heat, smell or instrument are in abnormal conditions;
check the leakage of hydraulic oil, lubricant, gas or fuel.
If any abnormal condition has been identified, please immediately adjust or repair it to
normal condition. Otherwise, it may cause injury accidents or machine damage.
Before the machine is traveling or working, check the frame fixing rod that used to lock
front and rear frame, the frame fixing rod shall be in a position of “release”.
Before operating the machine, heat the oil of engine, hydraulic tank and torque converter
to normal working temperature.
Remove all obstacles on the machine’s running path.
Keep window clean, and make sure all windows are in a safe opening or closing position.
Adjust the rearview mirror to the best field vision, make sure horns, alarms and other
warning devices are in good working conditions.
