36
springboard.
Use inclined plates with enough strength, width
and length to provide a safe loading or unloading
slope. The oblique angle between slant plate and
ground shall not exceed 15°. The distance
between the slant plates shall be compatible with
machine’s wheelbase
Firmly fix the position of slant plate, and make
sure they have the same height.
Make sure the surface of the slant plate is clean,
no lubricants, grease, ice and loose materials.
Clear the tires.
Do not turn direction on the slant plate. If
necessary, let the machine leave the slant plate,
and then adjust the wanted direction before
turning.
After loading materials, wedge the machine tires
and tighten the machine with cord.
1.6.7 PRECAUTIONS OF MACHINE TRANSPORTATION
When carrying this machine with trailer, it is necessary to comply with national and local
laws and regulations for the weight, height, and length of heavy objects and comply with
all relevant traffic laws and regulations.
Take machine’s weight, height, width and length into account when determining
transportation route.
Check whether its loading capacity can support the weight of the machine when passing
through a bridge or a structure.
When the machine walking on the public road, first check whether it is in comply with the
provisions of relevant authorities and follow those provision requirements.
The machine may need to divide into several parts for the convenience of transport. For
the division of this machine, please consult the designated dealer of LONKING Holdings
Limited.
1.6.8 PRECAUTIONS FOR DRAG
If the machine dragged with incorrect ways or wrong steel wires, it may cause injuries or
casualties; therefore, it is important to abide by the follow precautions:
