48
Never perform any repair or replacement
ahead of the complete release of the
pressure.
Wear safety glasses and leather gloves.
If the line leaks, then the line and its
surrounding will be wet, it’s time to check
whether there is crack in the steel pipe or in
the hose
，
or there is blister in the hose. If the
leaking place is difficult to identify, please
contact with the designated dealer of
LONKING Holdings Limited about repair
issues.
Do not use bare hands to check for leakage,
but to use the board or cardboard to check for
leakage.
If shot by the sprayed high-pressure oil, be
sure to contact the doctor for treatment
immediately.
1.8.20 PREVENTION MEASURES OF MAINTENANCE IN HIGH
TEMPERATURE OR HIGH PRESSURE
When the machine just stops working, cooling water and oil of all parts of engine is in high
temperature and high pressure. If now open the engine hood to do drain of oil, water or to
replace filter, this may lead to burn or other injuries. It is needed to wait for the
temperature drop, and then conduct repair according to requirements in the
User Manual.
1.8.21 WASTE DISPOSAL
In order to prevent pollution, especially in place lived with people or animals, must comply
with the following requirements:
Prohibit waste oil to dump into drainages and
rivers and other places.
Discharged oil from the machine shall be
placed in containers, do not discharge the oil
directly onto the ground.
When dealing with hazardous substances
such as lubricants, fuel, coolant, solvents,
filters, batteries and other substances, it is
necessary to comply with relevant laws and
