59
electrical system of loader, turn the battery
negative-pole
switch
handle
counterclockwise to “OFF” position. The
handle is parallel to the frame plane.
Turn on the battery negative-pole switch :
Before starting the loader, it is necessary to
turn the negative-pole switch handle
clockwise to “ON” position.
Do not turn off the battery negative-pole switch while the engine is in operation,
otherwise the electrical system of loader may be damaged.
3.3STARTER SWITCH
The starter switch (“electrical lock”) is arranged
on the panel of control box in the right of Cab. The
starter switch can be turned clockwise to four
positions.
1. Stop -counterclockwise turn the starter switch
key, the first position is “Stop”. Release the
key at this position, it can automatically return
to “OFF” position.
(Due to the different
operating functions of engine stop devices,
some engine can be able to turn off at "OFF"
condition).
2.
OFF
--(after stop) When the starter switch key
stays at this position, the power supply to
loader will be cut off.
Only at this position can the starter switch key
be inserted or taken out!
3.
ON
--clockwise turn the starter switch key, the
first position is “ON”. Keep the key at this
position, the electrical system of loader is
Warning
Stop
