87
Figure: Frame Fixing Rod
4. Horizontally place the bucket on the transportation vehicle, and then put the joystick at
the neutral position.
5. Push the working device joystick to the middle position.
6. Pull up the manual brake handle.
7. Turn off the engine, set all switch at middle position or off position, and then pull out
the electric lock key.
8. Properly close and lock all doors, and then pull out the key.
9. Pull the negative pole switch of battery to the off position.
10. When using a truck or towing tractor to transport the loader, be sure to use chocks to
block up the wheels and use wire ropes to fix the loader, so as to prevent the loader from
moving in the course of transportation.
4.5.1 HOISTING OF LOADER
1. The hoisting operation shall be commanded and carried out by professionals who
have the hoisting-related knowledge.
2. Please calculate the maximum hoisting weight of crane and the loading capacity of
sling (the weight of loader is 10500±300 kg), so as to ensure the safety. In addition,
please ensure that the four hooks on the sling will be under even stress.
3. Before the hoisting operation, be sure to carry out the following preparation:
1
Put the working device joystick at the neutral position.
2
Put the boom and bucket at the lowest position and push the working device joystick to
the middle position.
3
Pull up the parking brake solenoid valve.
④
Shut down the engine and pull the key out from the electric lock.
⑤
Close and lock up all doors.
1. Pull the negative pole switch of battery to the off position.
