8
5. Operating the Power-Tiny
5.4 Control choices
You may control the
Power-Tiny
externally through the XLR socket [12].
5.4.1 0 - 10 Volt (+) DC control
Connect the
Power-Tiny
to an analog desk or with the cable remote (available
as an optional extra), using the XLR socket [12] at the back of the machine.
a) Connect the cable from the desk or the cable remote into the XLR socket at
the back of the machine [12].
b) The knob on the cable remote or the fader on the analog desk will control the
level of the pump.
c) Pressing the On/Off switch at the cable remote starts the fog process.
5.4.2 Control via Radio remote
A radio remote is available as an option. It will be delivered with a 3pin XLR
plug.
a) Connect the receiver of the radio remote to the machine, using the 3pin XLR
socket [12] on the back of the machine.
b) Adjust the requested pump output at the machine, turning the adjusting knob
[10].
c) Press the first button at the transmitter of the radio remote as long as you
want fog to be produced (see manual „Radio remote“).
5.4.3 Other controls
DMX 512
: Connect the DMX-converter (DMXit, available as an option) to the
machine, using the 3pin XLR-plug [12].
Now the
Power-Tiny
can be connected to a DMX desk and can be controlled via
DMX.
Timer
: Connect the Timer (TIMEit, available as an option) to the machine, using
the 3pin XLR-plug [12].
Now the wait and the fog time as well as the output can be programmed in.
