38
MOUNTING THE PEDALS
Make sure the cranks are BSA (9/16x20).
Clean and grease the tapping of the crank before mounting the pedal.
Caution:
there is a right pedal and a left pedal. The left pedal, marked with a ring on the
axle, is screwed counterclockwise. The right pedal is screwed in a clockwise direction.
In both cases, the screwing is carried out inside the crank using an 8 mm Allen key for
the pedals equipped with a steel shaft and a 6 mm Allen key for those equipped with of a
titanium axle.
The recommended tightening torque is
40Nm
.
Summary of Contents for KEO BLADE
