Finalizing the Installation
(for qualified installers only)
41
© Travis Industries
6/27/2019 - 1500
864 31K CF Aust
Glass Frame Removal and Installation
Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Note
:
Remove the barrier before removing the glass (see previous page). Replace barrier after
replacing the glass.
You may use the included glass latch tool to unlatch the glass latch.
When done with the tool, place it on the base of the fireplace below
the concealment cover.
Based upon the face being used, either:
(a) swing the access door down and remove the top grill,
(b) remove the face (unscrew or lift off - see the instructions included with the face for details).
Open the six latches holding the glass frame in place (start with the bottom three) - follow the
directions shown to the right.
a
Lift the glass frame up and
pull it forward to remove.
b
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions above in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place.
NOTE:
You may need to lift
the glass frame
while re-attaching.
Glass
Top of
Firebox
Latch
Catch
(on glass frame)
