16
|
Instructions for use
| Elexo XXL Shower-toilet chair
Only the original charger for the Elexo XXL may be used. If you use another
charger, Lopital cannot be held liable for any consequences, such as damage to
the electronics.
Once the charger is connected to the Elexo XXL, the controls will go into ‘sleep’
setting (all functions are switched off).
The charger that must be used for the Elexo XXL is the ‘Mascot 2241’.
• When the indicator light on the charger goes
green, the battery is charged .
The charger can remain connected even when
the battery is completely charged . Leaving it
connected will not cause any damage .
• Disconnect the Elexo XXL from the charger .
• Once activated, the Elexo XXL is now ready for
use
(See paragraph 2.2. Activating)
.
LED not on:
Chair is in ‘sleep’ setting and cannot be used .
Green LED is on:
Chair is ready for use .
Orange LED is on:
Battery needs charging or battery is partially charged .
Orange LED blinks:
Emergency stop has been activated .
Red LED blinks:
Battery must be charged (chair can still be used) .
Red LED on:
Battery is completely empty and must be charged immediately .
Charge battery in a well-ventilated, dry space.
After using the chair, connect it to the charger to maintain the battery.
Charge the chair at least once a week!
For instruction videos go to www .lopital .com or www .youtube .com/user/LopitalNL
Figure 16 Battery indication on manual
control .