Reflex Chaise de douche-toilette |
Mode d’emploi
|
75
Fr
a
n
ça
is
D
eut
sch
English
Nederl
ands
Recommended separation distance between
portable and mobile RF communications equipment and the Reflex
The Reflex is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. The cus-
tomer or the user of the Reflex can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the Reflex as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum output power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d =1,2 √P
80 MHz to 800 MHz
d =1,2 √P
800 MHz to 2,5 GHz
d =2,4 √P
0,01
0,12
0,12
0,24
0,1
0,38
0,38
0,76
1
1,2
1,2
2,4
10
3,8
3,8
7,6
100
12
12
24
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m)
can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watt (W) according to the transmitter manufacturer.
NOTE 1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
