INSTALLATION
1
.
Install the feeding tray to the pipe of the metal construction as shown on picture 1.
2
.
Insert the curved pipe of canopy into the plastic elements located on the bottom of rocking chair
and fix it by using the bolts. (picture 2)
ADJUSTING THE POSITION
OF THE BACKREST
The backrest can be adjusted to 3 positions
.
Hold the adjusting mechanism with one hand
.
Loosen
the adjusting mechanism when the backrest is adjusted to the needed position
.
It will be locked
automatically by “click” sound. (picture 3)
ADJUSTING THE POSITION
OF THE FEEDING TRAY
The feeding tray can be adjusted to 2 positions
.
Press the adjusting buttons located on the both sides
of the feeding tray (picture 4c)
.
Make sure that the feeding tray is locked.
FIXATION OF THE ROCKING CHAIR
The rocking chair can be fixed when the position of the brackets are as shown on picture 5.
INSTALLATION AND REMOVAL
OF THE TOY
1.
Installation
:
-
insert the base of the toy into corresponding hole on the feeding tray (fig.1) and ensure that
cylindrical object on the bottom side of the base is in the hole, as shown on fig.2.
2.
Removal
:
- push the cylindrical object on the bottom side of the toy out of the hole in the base of feeding tray.
9