4
3
Make sure all power cables are at least
3ft / 1m away from the crib and out of
reach of your child.
Use the included cable clip to help keep
power cables away from your child.
See “Wall Mounting the Camera” on page
5 for details on installing cable clips.
4
Slide the ON / OFF switch on the camera to
the ON position.
2
Insert the battery so that the blue arrow on
the battery lines up with the white arrow
in the battery compartment. Replace the
compartment door.
Connect the included power adapters to the
monitor and the camera. Plug the power
adapters into a power outlet. Let the monitor
charge until the battery is full (about 3 hours).
NOTE:
The monitor and the camera should
be plugged in for overnight / prolonged
monitoring.
The power indicator LED is blue while the
monitor is charging, and turns green when
completely charged.
Press the Power button to turn on the monitor.
5
