Installing the Camera & Optional Extension Cable
5
Installing the Camera & Optional Extension Cable
1. Connect the optional Extension cable to the Camera:
•
Connect the BNC & Power ends of the cable to
the Camera
•
Connect the Power Adaptor connector to the AC
Power Cable attached to the camera.
Remember to check the ends of the cable before
permanent installation, as the power connection
ends are different (one side has a female barrel
power connection, and one end has a male power
plug.
CAMERA
:
Connect the BNC
and Power cables
to the Camera
VIDEO INPUT:
Connect the BNC
cable to the video
input of the monitor,
and connect the
power adaptor to an
outlet.
Camera Setup Diagram
2. Connect the BNC end of the Extension Cable to the
DVR / Observation System or to a TV/VCR.
NOTE:
Connect the BNC to RCA Adaptor as needed to
allow for proper connectivity.
3. Connect the A/C Power Adaptor to the Extension
Cable (Black connector). Plug the Power adaptor to a
wall outlet
