To install the camera:
1. Mount the camera stand to the desired mounting surface.
2. Attach the camera to the stand at either of the two
connection points at the back of the camera.
3. Connect the extension cable to the camera:
ATTENTION
- Test all connections and ensure the camera is working
correctly prior to permanent installation by temporarily connecting the
camera(s) and cable(s) to the viewing/recording solution.
Wall Mount
Ceiling Mount
Table Mount
Use the stand for ceiling, table, or wall mounting.
Connect the BNC
and power
connectors to the
camera.
Connect the BNC
connector to the video
input of the monitor/DVR,
and connect the included
power connector to a
power adapter.
Male power connector
Female power connector
BNC Connector
To Camera:
To Monitor/ DVR:
Contents
Features
•
High resolution AIS (Advanced Image Sensor) produces
sharp and clear video at 480 TV lines of resolution
•
Lorex Pure Flat™ lens eliminates image curving for an
undistorted view
•
Anti-glare technology ensures clear images even in
strong lighting situations
•
Exclusive built-in auto-mechanical infrared filter
achieves accurate color reproduction in varying lighting
conditions
•
Advanced day/night mode - picture automatically
switches to B&W delivering better clarity in low light
conditions
* Model CVC6950PK4 is a 4-pack that includes four of the listed items.
** A "4-in-1" Power Adapter (provides power to four cameras) may be substituted
for four individual power adapters, depending on product configuration.
•
Indoor / Outdoor Color Camera with Night Vision
•
Mounting Bracket / Stand*
•
60 ft. BNC/Power Extension Cable*
•
AC Power Adapter**
Installation Tips
•
Point the camera where there is the least amount of
obstructions (i.e. tree branches).
•
Install the camera in a location that is difficult for
vandals to reach.
•
Secure cabling so that it is not exposed or easily cut.
•
Connect your system and cameras to a back-up power
supply. This ensures the system continues to record
during power outtages.
Installing The Camera
Warning / Caution Statements
1.
Read this guide carefully and keep it for future reference.
2.
Follow all instructions for safe use of the product.
3.
Use the camera within given temperature, humidity and voltage levels noted
in Camera Specifications.
4.
Do not disassemble the camera.
5.
Do not point the camera directly towards the sun or a source of intense light.
6.
Use only the supplied regulated power supply. Use of a non-regulated, non-
conforming power supply can damage this product and voids the warranty.
7.
The supplied extension cable is rated for surface mounting only.
Cables for in-wall / floor-to-floor installations are sold separately.
Setup Diagram
ATTENTION
: This camera includes an Auto Mechanical
IR Cut Filter. When the camera changes between Day/
Night viewing modes, an audible clicking noise may be
heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
WARNING
- A REGULATED UL/CSA APPROVED power supply is REQUIRED
for use with this camera. Use of a non-regulated, non-conforming power
supply can damage this product and will void the warranty.
4. Connect the BNC end of the Extension Cable to the
DVR / Observation System or to a TV/VCR.
NOTE:
Connect a BNC-to-RCA Adapter (optional,
Lorex model # BNCB) as needed to allow for proper
connectivity.
5. Connect the A/C Power Adapter to the 60ft
Extension cable (Black connector). Plug the Power
adapter to a wall outlet.
Connect the BNC cable to a DVR, CCTV, monitor or TV.
AC Power Adapter
4-in-1 Power Adapter
(optional)
Connect an AC power adapter.
Connecting The Camera
