■
How to Use the Camera
Note
●
DC/VIDEO : Auto Iris Lens selection. (DC lens included)
• When using an auto iris lens, the setting of the auto iris lens selection
switch, located on the back of the camera, must be on DC or VIDEO
depending on the type of the lens which being used.
(Refer to the picture on page 13)
• The brightness of the screen can be adjusted in DC mode.
The brightness can be adjusted within the range of 0 ~100.
The optimum level of brightness can be achieved using this adjustment.
• If you press the Set button in "MANUAL LENS", You can Adjust
brightness in EXPOSURE.
• If you press the Set button in "DC/VIDEO", You can't adjust brightness
in EXPOSURE, Return to "LENS" and adjust brightness.
●
MANUAL : Manual Lens selection.
RETURN
LENS
RET
BRIGHTNESS
40
3. Press the SET button to return to the previous menu.
18
Super DNR High Resolution Color Camera
Super DNR High Resolution Color Camera
19
1. When the SETUP menu screen is displayed select EXPOSURE using
the Up and Down buttons.
2. Select the desired mode using the Left and Right buttons.
●
SHUTTER
1.The shutter speed is controlled manually.
2. Select 'FLK' mode when flickering occurs on the screen due to an
imbalance between illumination and frequency.
NTSC Model:1/100, PAL Model: 1/120
EXPOSURE
SETUP
LENS
DC
EXPOSURE
WHITE BAL
ㅡㅡㅡ
DAY NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
B/W
ON
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENSE-UP
BLC
D-WDR
RETURN
1/50
ㅡㅡㅡ
MIDDLE
AUTO
OFF
OFF
RET
Summary of Contents for CVC8011
Page 22: ...MEMO...
