SETUP
LENS
DC
EXPOSURE
WHITE BAL
ATW
DAY NIGHT
3DNR
SPECIAL
B/W
ON
WHITE BAL MANUAL
BLUE
RED
RETURN
21
15
RET
Note
• Under the following conditions White Balance may not work properly.
In such cases, select the AWC mode.
①
When the color temperature of the subject environment has a very
high temperature range (e.g. clear sky, or sunset)
②
When the ambient illumination of the subject is low.
③
If the camera is directed toward a fluorescent light, or is installed in
a place where illumination changes dramatically, the White Balance
operation may become unstable.
Pictures can be displayed in either color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' using
the Up and Down buttons.
DAY/NIGHT
22
Super DNR High Resolution Color Camera
Super DNR High Resolution Color Camera
23
■
How to Use the Camera
WHITE BALANCE
Use the White Balance function to adjust the screen colors.
1. Position the cursor to point to WHITE BAL on the SETUP menu screen,
select using the Up and Down buttons.
2. Select the desired mode using the Left and Right buttons.
●
ATW(Auto Tracking White Balance) : This mode can be used within
the color temperature range 2,000
˚
K ~ 9500
˚
K
●
AWB(Automatic White Balance) : This mode can be used within the
color temperature range 1,800
˚
K ~ 11,000
˚
K
●
AWC SET : To obtain the optimum state under the current luminance
levels, direct the camera to point toward a sheet of white paper
and press the SET button. If the environment changes, including
the light source, the white balance will require re-adjustment.
●
MANUAL : The manual adjustment mode enables finer adjustment.
Select ATW or AWB first then change to manual adjustment mode
and press the SET button. Set the appropriate color temperature
then increase / decrease the red and blue colour values and monitor
the color changes of the object.
SETUP
LENS
DC
EXPOSURE
WHITE BAL
ATW
DAY NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
B/W
ON
Summary of Contents for CVC8011
Page 22: ...MEMO...
